KSM118 WS2812B RGB LED 模組

排針未焊接

若是要做長條型燈條 1*8，矩陣型LED 8*8 請另外說明，有其它版本提供

WS2812B的是一個序列控制RGB LED的IC，只要有VCC，DI，GND 3條線就可以控制串接的燈

由於是序列控制RGB LED，所以你可以無延伸，可以做成1*8，1*16 等長型燈條，也可以做成 8*8，16*16 等矩陣型LED

Features and Benefits

• Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point.
• Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.
• Built-in electric reset circuit and power lost reset circuit.
• Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s.
• Cascading port transmission signal by single line.
• Any two point the distance more than 5m transmission signal without any increase circuit.
• When the refresh rate is 30fps, low speed model cascade number are not less than 512 points, high speed mode not less than1024 points.
• Send data at speeds of 800Kbps.
• The color of the light were highly consistent, cost-effective..

Applications

• Full-color module, Full color soft lights a lamp strip.
• LED decorative lighting, Indoor/outdoor LED video irregular screen.